Видео

This is ridiculous

You guys will never believe me how i fixed the problem. I just turned the whell a litle bit and the ignition unlocked. 😭 (I turned the ignition while still holding the wheel)

Thanks alot for this video! You showed me the way how to assemle this machine correctly😊😊

There several products online /shops that can do the job, I bought the liquid from Ali Express and fixed my niece headlights. Thanks for sharing 👍

Thank you for sharing 👍 my vacuum is around two years old and it last less than 5 minutes after fully recharged, unfortunately can't fix it at home without the welder. Wondering if you have another option to do that.

Arreglame unas 2 batteries se quemo la plakita

Thank you for sharing this useful video 👍😊 2:47

Thank you for sharing this useful tutorial 👍😊 1:03

Spot on mine was a seized motor, quick spray of contact cleaner then silicone lube job done

Question: What indicates a faulty injector - more fuel in the bottle or less? Thanks 8-)

The only real solution is glass headlights and they really don't make them anymore. If you use WD-40 it actually does work but you also need a clear coat to spray over that after its wiped clean and it will only last you about a year

Thank you thank you thank you, just switched out the cylinder on a 2012 Passatt. Putting back together is much more fun than taking apart😅. I really appreciate the help.

So far, one of the 2Ah cells has died in one, I have 4Ah cells and they are all good. The first ones are 4 years old. I don't use my own charger.

Link description please sir

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

If you understand the idea of electricity is generated over friction, then you understand why the motor is sparking

thx bro 👍💪

I have similar Bosch vc however the electronics disabled the operation due to battery replacement. Do you have any suggest how to solve the case?

Same issue . Original replacement makes it not visible to replace. This world is a throw away society. I have ordered the batteries and a spot welder. Thankyou for the video

Open a Parkside battery with a Bosch tool. 😂

what key to open the screw?

Great video... so many machines these days are not designed to be repaired like this. Can I ask where you sourced your two bearings and the seal? I did look for the codes on the bearings but could not find a retailer online... I'm sure I just need pointing in the right direction! Many thanks

Mine sparks at stopping as well. Maybe its the braking mechanism friction...Seems normal... I noticed his new motor sparked when stopping as well. Has to be the quick stop( braking )friction of the .motor metals. The motor is turning at over a thousand a minute. To instantly stop in a millisecond is gonna make a spark.

Amazing

❤

thanks for the knowledge.👍🏻

Як цікаво, я тільки що зремонтував такий самий акумулятор, тільки там шуруп недокрутили і ця пластинка відламалась від вібрації

I damaged all the nickel i took of the battery can anyone tell me what kind of nickel is used for these batterys please

1 cell collapsed & adding 20V this way the remaing four cells got 5V pr. Cell......

Забыли припаять????

please use yxky handheld spot welding pen

please use yxky handheld spot welding pen

Whoever decided this needed K-pop needs to be fired.

Had an issue with mine where I could not get the lock into the correct pin position. I ended up having to cut the unit in half and remove the innerds to get the lock to release.

I've recently purchased two 8Ah smart batteries but I keep running into an issue with them. I use both of them on the battery-powered grass mower (Parkside PRMA 40-Li C1 IAN420347). Intermittently, the mower will stop being powered by them. You can actually hear the mower blade speed ramping down a step before cut-off. Trying to start the mower again, it'll cut off within 3 seconds. Looking at the Parkside app, the batteries have 0 minutes runtime (despite having been used), aren't overheated (can confirm by touching?) and have a percentage remaining above 80%. Leaving the mower and batteries alone for some time will result in a longer period before cut-off again. I suspect either a thermal issue or bad cells.

Temperature is measured in degrees C or F. Heat is measured in Watts. So you are relying on getting a low temperature to attract viewers, but not telling them the the TEC barely has enough heat pumping power to keep a bear cold on a hot day and for how much power..? Thumbs down. for misinforming for money.

i insert a big allen key, then tighten it, hit it with a hamer, but the whole thing just rotates with a bit of force/impact applied...nothing comes loose...wonder what i'm doing wrong.

Aj mne to robí baterka ale z toho videa som toho moc nepochopil.

So what parts do I need to order for this? Just the ignition starter?

If the soldering points are worse than before it's not a repair...

No se ve la reparacion

Go brushless R/c motor. No sparks.

That is awesome. 😊🎉

A mi no me llega a salir agua ni tan siquiera por la manguera.. q problema seria?

Itu bukan perbaiki,tapi mengganti

The machine is good but the plastic heads are garbage. They bend and leave tracks on your carpet. Need steel heads

Cheie

Thx for the video. "a factory defect, false sc" or "so" can be read, then it cannot be read anymore. What is written there?

What is the required temperature for soldering?

No open batery only lap top changer 18volts 2 minuts + - batery - its problem solvetion 💯💪🇷🇸👑